Swing Door
There are lots of choices in Deco Plus door and wall cladding design. Every single door matches with different themes and tastes of interior and architectural design. Our swing doors keep the balance between aesthetics, door function and safety. With the proprietary technology of our company which provides the best solutions to architects including door automation, acoustics and fire resistance with better service level than others, we aspire to provide the best exprience to customers and end users.
Swing Door Product Reference
Dead matt
Swing Door
High gloss
Swing Door
Solid walnut
Swing Door
Grey oak
Swing Door
Grey
Swing Door
Grey oak
Swing Door
Leather inserted
Swing Door
Oak
Swing Door
Custom wood effect panel - 40 dB
Swing Door
Custom wood effect panel - 34 dB
Swing Door
-/60/60 FRR - Wood veneer
Swing Door
-/60/60 FRR - Wood finish lamination
Swing Door
High gloss
Swing Door
Oak veneered
Swing Door
Rustic
Swing Door
Custom wood effect panel - 39 dB
Swing Door
Wood grain effect Lamination - 44 dB
Swing Door
-/120/120 FRR - Wood lacquer
white matt finish
Swing Door
Why Swing Doors From DECO PLUS ?
01.
Flush and fully bonded door construction
● Flush version (for demanding architecture) or a Thick rebate version (for functional areas) with fully bonded fire resistance composite insert which increases leaf rigidity so the door closes with a rich sound.
02.
Elegant system in all functions
● Matching door appearance in all combinations with corner, block or profile frames. E.g. flush-fitting door leaf transition in double-leaf doors. It makes your planning for wall openings and passage widths simple.
03.
High quality and diverse finishes in various colors, textures and materials.
● Available in with powder coating/ galvanized finish/ DECO PLUS finishing solutions.
04.
Internal and external doors
● Both has different requirements for fire protection and performance characteristics e.g. wind load or water-tightness under heavy rain.
● For fire protection functions internal doors are subject to EN 1634, however, for external doors which exposed to wind and weather, are subject to EN 14351-1.
05.
Door furniture/ ironmongery solution
● For barrier-free passage, we provide automatic doors with various operative devices.
● Other door furniture such as lever handle set, hinges, closing devises, security bolts and other door access systems and technologies are also available upon request.
06.
The right solutions for your requirements:
● Fire-rated and smoke-tight doors
It is important to secure premises from life-threatening situations that is regulated heavily by fire-safety department in BS EN 1634. With DECO PLUS door solutions, doors are tested and officially approved.
● Acoustic-rated doors
Frequently specifying in function rooms that has a requirement of sound blocking by partitions, wall and doors. We could manufacture doors that can deliver acoustic values up to 44 dB.
● Security enhanced doors
Doors provided with additional break-in-resistant functions such as a (i) thick rebate version and (ii) an impact resistant glazing penal. Such doors are designed so that it withstand as long as possible in event of attempted unauthorized access and forced entry. There are diverse options regarding the surfaces, frames and other equipment for break-in-resistant doors.
GLAZING AND TOP ELEMENTS
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Round glazing
c
a
b
Structural opening height
≤2100mm
Structural opening height
＞2100mm
≥400mm
＝H-1900mm
≥200mm
≥200mm
≥400mm
＝200mm
Optional glazing 1
Optional glazing 2
Optional glazing 3
Round glazing panel’s diameter Ø =300mm
Figure 1, Figure 2, Figure 3, Round glazing, Optional glazing 1 applicable to HC 90 CCC, HCA 60 and HCA 30.
Figure 1, Figure 4, Figure 5, Figure 6, Figure 7, Round glazing, Optional glazing 2, Optional glazing 3 applicable to EZ, ZK-,HSW, HA-.
Figure 1, Figure 4, Figure 5, Figure 6, Round glazing, Optional glazing 2, Optional glazing 3 applicable to HMS.
Figure 1, Figure 4, Figure 5, Figure 7, Optional glazing 2 applicable to HCR 40, HT, HTE and HTE H.
Top light / panel / steel ventilation grille for HA-, ZK-, HG, HE and HMS door *
Steel ventilation grille for HMS, HA- door
Steel ventilation grille for HMS, HA- door
Please note critical dimensions below when ordering.
a≥ 150mm
b≥ 150mm
c≥ 200mm
* Mullion shall be applied if the structural opening width exceeds
2500 mm. Top steel ventilation grille is only available for HMS,
HA- door.
PRODUCT
CHARACTERISTICS
Internal door / external door for
• Fire protection
requirements
The choice of an internal or
external door depends on
the fifitting situation
(protected / unprotected) and
on the requirements of the
performance characteristics.
Ready-to-fifit door set with
universal corner frame
Door leaf and frame,
galvanized and with powder
coated primer in Grey white
(similar to RAL 9002)
Single- or double-leaf
Thermally insulated
UD = 1.5 W/(m²·K)
T30 fifire-retarding
Acc. to DIN 4102
EI230 fifire-retarding
Acc. to EN 16034
Sealing Sa
Self-closing characteristic
C5 200000 cycles
Possible additional
functions:
Break-in-resistant RC 2**
Acc. to DIN EN V 1627
Acoustic-rated*
Acc. to DIN EN ISO 717.1
with 32 – 43 dB
Smoke-tight S200
Acc. to DIN 18095
Smoke-tight RS
Acc. to DIN 18095
Glazings***
Clear fifire-proof glass F30
Door leaf glued over the entire surface
The fully bonded composite construction of the door leaf
ensures particularly high stability. The door always closes
securely and accurately with a satisfying noise. The risk of
door leaf warping or unevenness is virtually eliminated by
the permanently flflush surface.
Rebate and door leaf on request
We supply the fifire-rated door H3 OD in the thin rebate
version as standard. The door comes in a thick rebate
version for an identical view with your internal doors or in
the version with a flflush-closing door leaf for a very
elegant door appearance on request.
Round glazing
Ø 300, 400,
500mm
A frame for all wall types
The steel construction project door H3 OD is fifitted quickly,
easily and flflexibly with the universal corner
frame as standard. Thanks to the diagonal or anchor
plate, the frame can be fifitted in almost all fifitting
situations and wall types. The universal corner frame can
be easily upgraded to a profifile frame with the
Vario B53 counter frame.
Glazing
View 1
Glazing
View 2
Glazing
View 3
With optional glazing
On request, the steel construction project door H3 OD is
available with clear fifire-proof glass for more light. These
doors are equipped with an additional overhead door
closer.
Thin rebate version as standard
Optional thick rebate version
Optional flush-closing version
Universal corner frame, brickwork
* The acoustic values apply to solid doors without glazing and are not
applicable to doors fitted into gas concrete.
** The resistance class RC 2 applies to doors without glazing and is not
applicable to doors fitted into partition walls.
*** Please note: Glazed doors require an overhead door closer.
Universal corner frame with counter
frame Vario B53, concrete
TECHNICAL
FRAME PROFILE
PROFILE
THRESHOLD
TECHNICAL
